Gasboy CFN III Manager Manual V3.6 - Manual (Page 237)

MDE-4871 CFN III Manager’s Manual for Windows® XP Embedded - Version 3.6 · August 2010 Page 23-1
Disk-based Configuration Commands Configuration Command Summary
23 – Configuration Command Summary
Configuration commands affect operation of the system and must be used only by trained
personnel or with the advice of technical services.
The configuration commands are fully documented in MDE-4773 CFN III Configuration
Manual for Windows XP.
In the following summary forms of the configuration commands, square brackets, [...], mean
that the contents enclosed within the pair of brackets are optional.
Disk-based Configuration Commands
Options for each command: [-P][-V] [filename]
-P for print current configuration
-V display in TTY form if port is configured as a CRT in the system parameters, or vice
versa
Commands Definition
CONSOLE disk-based configuration program for a console
FUELPT disk-based configuration program for Fuel Point Readers (FPRs)
GATE disk-based gate-reader configuration program.
PERM disk-based command to change permission levels of system
resident commands
PUMP disk-based configuration program for pumps
READER disk-based configuration program for island card reader
SYS_PAR disk-based configuration program for system parameters; main
configuration program for Site Controller
TABLE disk-based configuration program for data table sizes
TRFMT disk-based configuration program for local transaction format