beautypg.com

How to use permission levels, New security.bin program, System key management – Gasboy CFN III Manager Manual V3.6 User Manual

Page 51: How to use permission levels -7, New security.bin program -7, System key management -7, Access allowed

background image

MDE-4871 CFN III Manager’s Manual for Windows® XP Embedded - Version 3.6 · August 2010

Page 4-7

New Security.bin Program

Users

How to Use Permission Levels

Permission levels can ensure Site Controller security.

It is probably more appropriate to think of Site Controller users as job functions rather than as
individuals. For example, a typical attended site might have separate user IDs for Cashier,
Supervisor, Manager, and System Configuration and Maintenance. The permission levels for
each might be as follows:

Ideally, each user must have access to only the commands required for that user’s job. This
requires careful planning. You must decide what commands each level of user will require to
use, and assign permission levels to commands accordingly.

Access Allowed

User Access to the system can be Enabled or Disabled.

New Security.bin Program

System Key Management

System key management is controlled from the security.bin program. The program will bring
up a system key management window that is used for setting up and controlling the keys
required for system security. The security.bin program requires separate users to enter the two
parts of the security key to maintain the safety of split knowledge and dual control. The system
key must be updated at least once a year to meet the PCI security standards. The system key
does not expire after one year. The maintenance of the system key is up to each site
administrator.

System Key Management
1.0.1.0

Security Administration Menu

1. Enter New System Pass Key : Not Entered
2. Save Pass Key to diskette : N/A
3. Enter New System Master Key : N/A
4. Save Master Key to diskette : N/A
5. Get Pass Key from Diskette : Pass Key Not Read From Diskette
6. Get Master Key from Diskette : Master Key Not Read From Diskette
7. Update System Keys : System Previously Updated

Enter Item Number, RETURN-Next Page, Q-Quit
At any time press ? for help :

User Job

User Permission Level

Cashier/Attendant

1

Supervisor

4

Manager

8

Maintenance/Programmer

9

PCI Administrator

10

This manual is related to the following products: