Gasboy CFN III Manager Manual V3.6 - Manual (Page 16)

Introduction Operating System
Page 1-2 MDE-4871 CFN III Manager’s Manual for Windows® XP Embedded - Version 3.6 · August 2010
Quitting the CFN3 Application
The preferred way to quit the CFN3 application is to press Alt and when continuing to press
the Alt key, press the X key. This will terminate your site operations. If you forget this, this
method is mentioned when you log on at the top of the screen as illustrated in
Figure 1-1 on
page 1-3 .
Minimizing the Command Window
The site controller runs with either the command window open or minimized.
Minimizing the CFN3 command window collapses the window on your desktop into the
taskbar at the bottom of the screen, running it in the background. To place the window in the
background, click the small box in the upper right corner of the command window that has an
underline. Notice the box with the “X”. Clicking once on the X will quit the application and
terminate site operations; this is not the recommended way of quitting the site operations. You
required to log on again by double-clicking on the CFN3 icon. Ensure that the CFN3
command window must remain either open or minimized to communicate with the SC III. If
your window is not open, or has been “minimized”, click once, using the left mouse button, on
the CFN3 box in the taskbar to open the window onto the desktop.
Should you accidently quit the CFN3 program by clicking in the “X” in the upper right corner,
double click on the CFN3 icon using the left mouse button and log in again.
Levels of Operation
The SC III has two user levels of operation:
• Gasboy: Used for the daily CFN3 operation (and Integral Profit Point system, if present).
• Administrator: Allows you to add software updates, create/delete users, add passwords,
change your PC settings, and so on.
Running the site from the Administrator level is a violation of the PCI Security Standard.
WARNING