Permission levels, Permission levels -6 – Gasboy CFN III Manager Manual V3.6 User Manual
Page 50
![background image](https://www.manualsdir.com/files/787488/content/doc050.png)
Users
Permission Levels
Page 4-6 MDE-4871 CFN III Manager’s Manual for Windows® XP Embedded - Version 3.6 · August 2010
Permission Levels
The standard User Permission Level range is from level 0 to 10.
Every command is associated with a certain permission level. For commands that have the A
or I options, the command used with the option may have a different permission level than the
plain command (refer to the chart in the Command Permission Levels chapter in MDE-4773
CFN III Configuration Manual for Windows XP for details).
Command permission levels may be changed by using the disk-based configuration program
PERM. Disk-based commands are assigned permission levels by the disk-based command
SET_PERM.
Permission levels are usually assigned during the initial configuration of the system, but you
must verify that the permission levels in use are appropriate for your system. Refer to
on
for more information.
Refer to the MDE-4773 CFN III Configuration Manual for Windows XP if you require more
information about assigning permission levels to commands.
Three things determine whether a user has access to a command. They are: the user’s
permission level, the command’s permission level, and the position of the console keyswitch
(if entering commands from a console).
• If a user has a permission level that is equal to or greater than the permission level required
for a command, that user may execute that command.
• If a user is signed on to a console, the console keyswitch may also raise the user’s effective
permission level. The permission level associated with each key, when inserted, will be in
effect if it is higher than the user’s permission level. The key position permission levels
are as follows:
Key Position
Permission Level
Profit Point, 5-position:
5 (automatically signs on user 2)
user 2’s
4 (automatically signs on user 1)
user 1’s
3 ON
1
2 SUPERVISOR
4
1 MANAGER
8
Profit Point, 3-position:
1 ON
1
2 OFF
0
3 MANAGER
8