Gasboy CFN III Manager Manual V3.6 - Manual (Page 138)

Proprietary Cards Fueler ID - Fleet Packages Only
Page 13-16 MDE-4871 CFN III Manager’s Manual for Windows® XP Embedded - Version 3.6 · August 2010
9 CFN w/Key Option system account number on a key is 1 to 19 of the 20 key ID characters.
10 CFN w/Key Option keys may not be compatible with 1000 FleetKey/TopKAT keys. They may
be if encoded under the 1000 FleetKey/TopKAT mode and no PIN.
11 The CFN w/Key Option system does not use key numbers.The KE200 Key Encoder in the
CFN mode sets key numbers to a default value of 9999.
12 The Key Option Manager Plus will not be compatible with the CFN w/Key Option system.
13 TopKAT keys are not compatible with the CFN w/Key Option system.
Fueler ID - Fleet Packages Only
Fueler ID cards are now supported. For the card to be accepted, the system ID and site ID must
be correct for that site. The Fueler ID is set by either swiping a card or entering the ID in the
FUELER.BIN program. From then on the Fuel Point
® and island reader transactions will be
marked in the disk journal with the clerk ID as the fueler ID. All pumps in the cluster assigned
to the reader the card was swiped on belong to that fueler.
Assigning a Fueler ID to a Cluster
Use the program FUELER.BIN to set the fueler ID for a cluster. The syntax is:
fueler [ ]
If the arguments are not provided, the current state of all fuelers is shown. Currently only
clusters 1-9 can have a fueler. Entry of a Fuel ID card generates a disk journal event type 197
with the first two characters of the text field containing the cluster number.
For reference, the Fueler ID card format is:
.xxxxxx.ssssssii.yymm2
Symbols Description
. field separator
xxxxxx system ID
ssssss site ID
ii fueler ID