Gasboy CFN III Manager Manual V3.6 - Manual (Page 322)

Glossary
Glossary-12 MDE-4871 CFN III Manager’s Manual for Windows® XP Embedded - Version 3.6 · August 2010
Preset
A preset sale is one where a specific dollar amount or volume is requested before pumping
starts. Both prepay and postpay sales can have preset amounts.
Previous Sale
The POS console can keep track of two sales for each pump. The previous sale for a pump is
the sale that is displayed when you first press the PREV key. Also refer to
“Current Sale” .
Printed Circuit Board
A computer board that an electronic circuit has been printed or etched on.
Printer
An output device that prints data from the Site Controller.
Printout
A printed copy of the information produced by the Site Controller.
Program
A set of prepared instructions that a computer such as the Site Controller carries out in
sequence to provide a solution to a problem.
Programmable Read Only Memory
A type of read-only memory (ROM) chip that can be programmed.
PROM
Refer to “Programmable Read Only Memory” .
PROMPT
The character the Site Controller uses to indicate that it’s waiting for your response. The
prompt for the Site Controller II is the current drive letter (A, B, C, or D) followed by an
asterisk. The prompt for the Site Controller III is P. Commands that require you to enter
additional information display prompts to tell you what information to enter. The console and
island card reader also display prompts when additional information must be entered.
Proprietary Card
A magnetic strip card issued for use with a specific CFN system. Proprietary Cards must
conform to the CFN Proprietary Card format.
Pump
In CFN System documentation, one hose on a single or dual dispenser or pump, or one set of
hoses on a multi-product dispenser.
RAM
Refer to “Random Access Memory” on page Glossary-13 .