Gasboy CFN III Manager Manual V3.6 - Manual (Page 46)

Gasboy International Site Controller III
Version 1.0.0.4
Password Administration Menu
1. Add New User to System :
2. Enable or Disable User :
3. Modify User Information :
4. Remove User from System :
Enter Item Number, Q-Quit
At any time press ? for help :
Users User ID Numbers
Page 4-2 MDE-4871 CFN III Manager’s Manual for Windows® XP Embedded - Version 3.6 · August 2010
Run admpass. The Password Administration Menu appears.
Adding a New User
To add a new user to the system, proceed as follows:
1 Select item 1.
Note: The User ID will be a number between 0 and 99. User number 97 and 98 must be
reserved and must not be used for general user.
2 If the user already exists, a warning will be displayed and the administrator must answer to the
prompt, to continue or to abort the process.
Adding a new user requires a password to be entered by the administrator. This is also required
to modify other default items, if required. The new password added will expire after the first
login by the user. The user has to setup a new password at the first login. If the user does not
set up a new password to replace the temporary password loaded by the administrator, the user
will not be allowed access to the system until the administrator resets the password again. The
number of days before the password expires is 90 days and the user is enabled, as default.
Enabling or Disabling a User
To enable or disable existing users, select item 2.
Note: Disabling an account will not extend the timing for a password to expire.
Modifying User Account
To modify user account, select item 3.
Note: The administrator can change some account parameters, using new password,
changing the security level, and disabling or enabling the user. If the administrator
changes the password, the user will be required to enter a new password when they first
access the system.
Removing a User from the System
To remove a user from the system, select item 4.