Gasboy CFN III Manager Manual V3.6 - Manual (Page 297)

MDE-4871 CFN III Manager’s Manual for Windows® XP Embedded - Version 3.6 · August 2010 Page D-15
Messages in Command Mode Status and Error Messages
Manager key required
Need user with higher permission level to sign on and run the command.
No more file space
There is no room in a file for information you are trying to add. For example, this message is
printed if you try to add too many island card reader messages.
You are adding rows to a table that is full.
Delete some rows, or if required and if enough space is available, reconfigure the system with
a larger table size.
Permission denied
Your permission level is not high enough to execute the command you just entered.
Insert the manager key in the console on this site, sign on as a user with a higher permission
level, or have another user with a higher permission level sign on to execute the command.
Program checksum error
Try the command again.
If the message persists, use a backup copy of the program.
Pump deactivated
You deactivated a pump with the command DEACTIVATE PUMP.
Pump is not on
You tried to deactivate a pump that was not pumping.
Pump is ready
You activated a pump with the command ACTIVATE PUMP.
Site is stopped
Operations are suspended at the site.
No transactions are in progress.
Use RUN to resume operation.
Some valid, some not
You have limited lockout and used wildcard numbers with the command CHECK CARD,
LOCK CARD, or UNLOCK CARD, but there was not an exact match.