Gasboy CFN III Manager Manual V3.6 - Manual (Page 267)

MDE-4871 CFN III Manager’s Manual for Windows® XP Embedded - Version 3.6 · August 2010 Page 28-1
Site Controller III Optional Packages
28 – Site Controller III Optional Packages
Almost all of the Site Controller’s functions are included in its standard package, but there are
some features that are optional.
Several options are grouped together in the Fleet package:
• The Lookup Program: Refer to “Lookup Program” on page 14-1 .
• The MPG System: Refer to “Miles per Gallon System” on page 15-5 .
• Supervisor Cards: Are coded to allow (and have the Site Controller accept) the manual
entry of any valid card number, employee number, and vehicle number. This allows a
supervisor to enter information for an employee with a lost or damaged card. For an ICR
only.
• Fuel-drop Cards: Are swiped through an island card reader by a tank-truck driver who
can then enter the number of the tank that received fuel and the number of gallons/liters
received.
• Dipstick Cards: Are swiped at a reader by a site employee who has just used a tank
dipstick and who then enters the tank number and gallons/liters in the tank, as seen on the
dipstick.
• Fueler ID Cards: Are swiped at an island card reader by a site employee who is then
responsible for all transactions at that island or on a particular pump.
• Chain-pumping Feature: Turns on all “pumps” in a cluster (including such “pumps” as a
grease gun or air hose) when a master pump in the cluster is turned on. This feature is
useful at sites that have fully equipped repair bays.
• Optical Cards: Can be read in an optical reader.
Other options are available individually, not as part of a package:
• Fuel Point System: Which automatically reads vehicle identification, fuel authorization,
and odometer information directly from a module installed on the vehicle.
• Tank Gauge Interface: Supports Tank gauges that have the Veeder-Root ® protocol.
• Bank-card Network Router: Allows the use of one of the routers described in the Credit
and Debit Card Network manuals.
• Special Card Types: Allow the use of cards that are authorized locally and that do not
follow the standard Gasboy card format.
• Dpt String Selection: Allows the use of special CITGO network messages.
• Gate Reader Interface: Allows the site to have a gate reader.
• Currency.
• SDI: Allows the site to use various devices. SDI is the interface.
• Key Option: Allows operators to use smart keys at an Islander II.
• Pump PC Interfaces: Gilbarco, Wayne, Tokheim.
• In-the-pump Reader PC Interfaces: Gilbarco CRIND, Wayne CAT, Tokheim Insight.