Gasboy CFN III Manager Manual V3.6 - Manual (Page 136)

Proprietary Cards Key Option
Page 13-14 MDE-4871 CFN III Manager’s Manual for Windows® XP Embedded - Version 3.6 · August 2010
1 Select option 4. Configure Attendant reports. The following screen displays.
********** Standard Reporting Package Parameters **********
1. Copies to print to log printer: 0
2. Copies to print to receipt printer: 1
3. Audit Copies to print to log printer: 0
4. Audit Copies to print to receipt printer: 0
5. Number of digits in attendant number: 2
6. Offset of attendant number in card data: 0
7. Use clerk number as attendant number: Y
8. Tender attendant is responsible for: 0
9. Optional second attendant Tender: 3
10.Optional third attendant Tender: 005
11.Display taxes separate in attendant report: N
----------------------------------------
Enter parameter #, or Q to quit:
2 Change option 7. Use clerk number as attendant number to Y.
3 Change options 8 - 10 to required tenders.
Note: For attendant cash sales, use tender 005. This must be the last tender specified.
Key Option
The Key Option allows the operator to use smart keys at an Islander II site.
Note: The Key Option may not be compatible with 1000 Fleetkey/TopKAT and the Fleet Key
Manager Plus will not be compatible with the CFN Key Option system (refer to
“Restrictions Using the CFN with Key Option System” on page 13-15 ).
Communicating with the Site Controller
The Site Controller must be configured to work the Key Option just as other Proprietary
Cards. See the chapter Key Option in the Site Controller II Configuration Manual for specific
information.
To communicate with the Site Controller, the Key is converted into a club card format before
the data is sent. The Key Option reads the following keys:
• Single Key
• Employee Key (dual)
• Vehicle Key (dual)
• Supervisor Key (supervisor option only)
• Delivery Key (fuel drop option only)
• Dipstick key (dipstick option only)
• Code Key