Zilog Z80180 - Manual (Page 194)

Z8018x
Family MPU User Manual
UM005003-0703
179
6 Z R/W 0 Zero.
Z is set to 1 when instruction execution produces 0 result.
Otherwise, Z is reset to 0.
5 Not Used ? ? Not used
4 H R/W 0 Half Carry.
H is used by the DAA (Decimal Adjust Accumulator)
instruction to reflect borrow or carry from the least
significant 4 bits and thereby adjust the results of BCD
addition and subtraction.
3 Not Used ? ? Not used.
2 P/V R/W 0 P/V: Parity/Overflow.
P/V serves a dual purpose. For logical operations P/V is
set to 1 if the number of 1 bit in the result is even and P/V
is reset to 0 if the number of 1 in the result is odd. For two
complement arithmetic, P/V is set to 1 if the operation
produces a result which is outside the allowable range
(+ 127 to -128 for 8-bit operations, + 32767 to - 32768 for
16-bit operations).
1 N R/W 0 Negative.
N is set to 1 if the last arithmetic instruction was a subtract
operation (SUB, DEC, CP, etc.) and N is reset to 0 if the
last arithmetic instruction was an addition operation (ADD,
INC, etc.).
0 C R/W 0 Carry.
C is set to 1 when a carry (addition) or borrow (subtraction)
from the most significant bit of the result occurs. C is also
affected by Accumulator logic operations such as shifts
and rotates.
Bit
Position Bit/Field R/W
Value Description