Metrohm tiamo 2.2 Manual - Manual (Page 878)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
864 ￭￭￭￭￭￭￭￭ tiamo 2.2
Identifica-
tion Description
EP{x}.ERC 2. derivative for the endpoint x (1…9) in the unit
of the measured value
EP{x}.MEA Measured value for the endpoint × (1…9) in the
unit of the measured value
EP{x}.TIM Time for the endpoint x (1...9) in s
EP{x}.VOL Volume for the endpoint × (1…9) in mL
EVT End volume (total dosed volume at the end of the
command) in mL
FIN Command status; 1 = Command has ended at
least once, 0, invalid (variable not available) =
Command has never ended
FP{x}.ERC 2. derivative for the fixed endpoint x (1...9)
FP{x}.MEA Measured value for the fixed endpoint × (1…9) in
the unit of the measured value
LP{x}.TIM Time for the fixed endpoint x (1...9) in s
FP{x}.VOL Volume for the fixed endpoint × (1…9) in mL
IME Initial measured value (measured value before start
conditions are processed) in the unit of the meas-
ured value
LP.CAx Calculated value × (1...3) for the last measuring
point on the measuring point list
LP.ERC 2. derivative (1...3) for the last measuring point of
the measuring point list
LP.EXx External value × (1...3) for the last measuring point
of the measuring point list
LP.MEA Measured value for the last measuring point of the
measuring point list in the unit of the measured
value
LP.TIM Time for the last measuring point of the measuring
point list in s
LP.VOL Volume for the last measuring point in the meas-
uring point list in mL
MA.MEA Maximum measured value in the unit of the meas-
ured value