Metrohm tiamo 2.2 Manual - Manual (Page 123)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 3 Workplace
tiamo 2.2 ￭￭￭￭￭￭￭￭ 109
Sample data
Note
The names defined here will be used only for the column headings in the
sample table.
The names defined in the START command under Method variables
will always be used when editing a sample line and for the determination
data.
Sample position
on | off (Default value: on)
Enable/disable the display of the column Sample position in the sample
table. The option also exists of renaming the heading of this column in the
working sample table.
Input 50 characters
Default value Sample position
ID1 … ID3
on | off (Default value: on)
Enable/disable the display of the column ID1 … ID3 in the sample table.
The option also exists of renaming the heading of this column in the working
sample table.
Input 50 characters
Default value ID1…3
ID4 … ID16
on | off (Default value: off)
Enable/disable the display of the column ID4 … ID16 in the sample table.
The option also exists of renaming the heading of this column in the working
sample table.
Input 50 characters
Default value ID4…16
Sample size
on | off (Default value: on)
Enable/disable the display of the column Sample size in the sample table.
The option also exists of renaming the heading of this column in the working
sample table.