Metrohm tiamo 2.2 Manual - Manual (Page 174)

3.6 Subwindow Run ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
160 ￭￭￭￭￭￭￭￭ tiamo 2.2
￭ Process
Options for processing the working sample table on the tab Determi-
nation series.
￭ Data import
Enabling/disabling the import of external data for working sample table
fields.
￭ Comment
Entry of comment on the working sample table.
3.6.4.10.2 Properties - Display
Dialog window:Workplace ▶ Tools ▶ Sample
table ▶ New… ▶ [Sample table] ▶ Properties… ▶ Properties - Sample
table 'Name'
Dialog window:Workplace ▶ Run ▶ Determination series ▶ Prop-
erties Run window ▶ Properties - Determination series
Definition of the operating elements and columns that are to be displayed
in the sample table.
Operating elements
Note
This parameter group is visible only if the dialog window above the tab
Determination series is open.
[Pause]/[Cont]
on | off (Default value: on)
Enable/disable the display of the operating buttons [Pause] or [Cont].
[Hold]/[Cont]
on | off (Default value: on)
Enable/disable the display of the operating buttons [Hold] or [Cont].
Determination parameters
Note
This parameter group is visible only if the dialog window above the tab
Determination series is open.