Metrohm tiamo 2.2 Manual - Manual (Page 1184)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1170 ￭￭￭￭￭￭￭￭ tiamo 2.2
Timeout
on | off (Default value: off)
If this option is activated, then a maximum waiting time for event messages
can be entered. If none of the conditions defined above are fulfilled after
this time period, the command is canceled and the next command in the
sequence is executed.
Value
Range 0 ... 9999.9
Default value 0
Unit
Selection min | s
Default value s
Message
This message is displayed in the live window while waiting for the condition
defined above. The text editor for entering or changing the message is
opened with or by double-clicking into the text field.
5.6.9.5.3 RECEIVE - Wait for event/status
Dialog window: Method ▶ RECEIVE ▶ Properties... ▶ [New]/[Properties] ▶ Wait for
event/status
Command
Name of the command whose event message or status is to be waited for.
Selection Command
Event message
Selection of the event message to be waited for, or of the status to be waited
for. The following event messages and statuses can be selected.
Selection Event message | Start
Default value Start
Event/
Status Type Significance Com-
mands
Start Event Command has been started. All
End Event Command has been finished. All
Dosing Event The dosing of the titration has been
started. DET, MET