Metrohm tiamo 2.2 Manual - Manual (Page 56)

2.4 Formula editor ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
42 ￭￭￭￭￭￭￭￭ tiamo 2.2
Identifica-
tion Description Commands
.NMP Number of measuring points in the
measuring point list DET, MET, SET,
KFT, KFC, BRC,
STAT, MEAS
(without Ref,
Spec), CAL
MEAS, DOS
.PK{x}.ABS Absorbance of the peak x (1…9) in
mAU MEAS Spec
.PK{x}.TRN Transmission of the peak x (1…9) in
% MEAS Spec
.PK{x}.CNT Intensity of the peak x (1…9) in
counts MEAS Spec
.PK{x}.CNR Intensity of the peak x (1…9) in the
reference spectrum in counts MEAS Spec
.PK{x}.CND Intensity of the peak x (1…9) in the
dark spectrum in counts MEAS Spec
.PK{x}.WVL Wavelength of the peak x (1…9) in
nm MEAS Spec
.PK{x}.SAT Detector with peak x (1…9) satura-
ted: 1 = saturated;0 = not satu-
rated MEAS Spec
.RAN Current, absolute rotation angle of
the rack in ° in relation to the axis
of the selected tower (entry when
ending the command) MOVE
.RE{x}.DRC Correlation coefficient for mean
dosing rate in window x (1…9) STAT
.RE{x}.DRS Standard deviation for mean dosing
rate in window x (1…9) in mL/min STAT
.RE{x}.DRT Mean dosing rate in window x (1…
9) in mL/min STAT
.RE{x}.RWL Lower limit of the evaluation win-
dow x (1…9) in s STAT
.RE{x}.RWH Upper limit of the evaluation win-
dow x (1…9) in s STAT