Metrohm tiamo 2.2 Manual - Manual (Page 1244)

6.3 Configuration data ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1230 ￭￭￭￭￭￭￭￭ tiamo 2.2
Workplace views
on | off (Default value: on)
Imports saved workplace views (see Chapter 3.1.7.1, page 92).
Database views
on | off (Default value: on)
Imports saved database views (see Chapter 3.1.7, page 92).
Result templates
on | off (Default value: on)
Imports saved result templates (see Chapter 5.6.8.2.6.1, page 1152).
Control chart templates
on | off (Default value: on)
Imports saved control card templates (see Chapter 4.4.2.1, page 240).
Curve overlay templates
on | off (Default value: on)
Imports saved curve overlay templates (see Chapter 4.4.3.1, page 244).
Buffer data
on | off (Default value: on)
Imports configuration data for custom buffers (see "Buffer table", page
1234).
Conductivity standards
on | off (Default value: on)
Imports configuration data for conductivity standards (see Chapter
6.3.3.4.1, page 1238).
E-mail templates
on | off (Default value: on)
Imports saved E-mail templates (see Chapter 6.3.3.5, page 1239).
Text templates
on | off (Default value: on)
Imports saved text templates (see Chapter 3.5, page 120).