Metrohm tiamo 2.2 Manual - Manual (Page 60)

2.4 Formula editor ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
46 ￭￭￭￭￭￭￭￭ tiamo 2.2
Result variables
Identifi-
cation Description Data type
.VAL Result value, optional, i.e. 'RS.RS01' =
'RS.RS01.VAL' Number
.ASD Absolute standard deviation for the result Number
Max. Maximum value of the result Number
min. Minimum value of the result Number
.MNV Mean value of the result Number
.NSR Statistics actual counter for the result Number
.NST Statistics setpoint counter for the result Number
.OVF Limit value violation for result; 1 = limit
exceeded, 0 = limit not exceeded Number
.RSD Relative standard deviation for the result Number
.STS Statistics status for the result; 1 = Statistics
on, 0 = Statistics off Number
.UNI Result unit Text
.SLO Slope for the linear regression (result vs. sam-
ple size) Text
.ITC Axis intercept for the linear regression (result
vs. sample size) Text
.COR Correlation coefficient for the linear regression
(result vs. sample size) Text
2.4.3.6 Determination variables
Dialog window: Formula Editor ▶ Variables
Determination variables are general variables that are generated in the
method run. They are not assigned to individual commands. The Varia-
bles field of the Formula editor lists the determination variables which
are available for the current method, sorted according to name.
Syntax
'DV.Variable name'
Examples: 'DV.DUR', 'DV.STT'
You can select the determination variables directly in the formula editor
under Variables/Determination variables in order to avoid syntax errors.