Metrohm tiamo 2.2 Manual - Manual (Page 53)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 2 General program functions
tiamo 2.2 ￭￭￭￭￭￭￭￭ 39
Identifica-
tion Description Commands
.LP.DME Measured value differential for the
last measuring point on the meas-
uring point list MET
.LP.DVT dV/dt for the last measuring point
on the measuring point list (SET,
KFT, STAT, DOS) or drift for the last
measuring point on the measuring
point list in µg/min (KFC, BRC) SET, KFT, KFC,
BRC, STAT, DOS
.LP.ERC ERC for the last measuring point in
the measuring point list DET
.LP.EXx External value x (1…3) for the last
measuring point on the measuring
point list DET, MET, SET,
KFT, KFC, BRC,
STAT, MEAS
(without Ref,
Spec, Opt), DOS
.LP.GFL Gas flow value for the last measur-
ing point on the measuring point list
in mL/min MEAS T/Flow
.LP.IGE Current pulsed current for the last
measuring point in the measuring
point list in mA KFC, BRC
.LP.MEA Measured value for the last meas-
uring point of the measuring point
list in the unit of the measured value DET, MET, SET,
KFT, KFC, BRC,
STAT, MEAS
(without Ref,
Spec), CAL
MEAS, DOS
.LP.QTY Measured value (water) for the last
measuring point in the measuring
point list in µg KFC, BRC
.LP.TEM Temperature for the last measuring
point of the measuring point list in
°C DET, MET, SET,
KFT, KFC, BRC,
STAT, MEAS
(without Ref,
Spec), CAL
MEAS, DOS