Metrohm tiamo 2.2 Manual - Manual (Page 23)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 1 Introduction
tiamo 2.2 ￭￭￭￭￭￭￭￭ 9
Warning
This symbol draws attention to a possible hazard due
to heat or hot instrument parts.
Warning
This symbol draws attention to a possible biological
hazard.
Caution
This symbol draws attention to a possible risk of dam-
age to instruments or instrument parts.
Note
This symbol marks additional information and tips.
1.10 What is new in tiamo 2.2?
Introduction
In this chapter the changes since tiamo 2.1 are described.
1.10.1 New features
New instruments
￭ 859 Titrotherm
Note
When installing tiamo 2.2 an eventually existing USB driver for the 859
Titrotherm from the Multitrator software will be deleted and replaced by
the tiamo driver. Therefore it cannot be titrated with the Multitrator soft-
ware on this system anymore.
New commands
￭ TET: Command for thermometric titration with the 859 Titrotherm.
￭ RLS DEV: Release device for parallel working on another workplace.
￭ RLS DOS: Release dosing device for parallel working on another work-
place.
News in the program part Workplace
￭ Sample data: By typing in the first characters to the field Method the
selection of the method is continuously restricted and allows fast select-
ing of the method required.