Metrohm tiamo 2.2 Manual - Manual (Page 441)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.2 ￭￭￭￭￭￭￭￭ 427
5.6.2.2.5 START - Method variables (Properties)
Dialog window: Method ▶ START ▶ Properties... ▶ START 'Command
name' ▶ Method variable ▶ [Properties] ▶ Method variable - 'Name'
Definition of the method variable
Name
Freely selectable name of the method variable which must be unique within
the method.
Input 50 characters
Type
Selection of the variable type. This field cannot be edited with variables with
a unique type (Sample size, Unit, Sample position).
Selection Text | Number | Date/Time
Default value Text
Assignment
on | off (Default value: on)
If this option is enabled, a sample variable can be selected which is to be
assigned to this method variable. Only those variables which are not yet
assigned can be selected. Sample data variables that have not been assigned
to a method variable are not included in the list boxes for other commands
and are not stored in the determination. No formulas can be entered in this
field.
Selection ID1 … ID16 | Sample size | Unit | Sample posi-
tion
Note
The name of the assigned method variables is displayed automatically for
the sample data variables ID1 … ID16, Sample size, Unit, Sample
position in the subwindow Run on the tab Single determination and
in the subwindow Information on the tab Sample.
Fixed value
on | off (Default value: off)
If this option is enabled, then the method variables can be assigned a fixed
value. For variables of the type Date/Time, the date must be entered in the
dialog window 2.5.1Select date. No formulas can be entered in this field.