Metrohm tiamo 2.2 Manual - Manual (Page 59)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 2 General program functions
tiamo 2.2 ￭￭￭￭￭￭￭￭ 45
Identifica-
tion Description Commands
.TITER Titer value of the solution used for
the command DET, MET, SET,
KFT, STAT,
STDADD dos,
STDADD auto,
ADD, DOS, LQH
.TOL Tolerance within which a measured
peak can be assigned to a calibra-
tion wavelength. CAL Spec
.TOU Timeout status: 1 = Timeout
expired; 0 = Timeout not
expired RECEIVE, TRANS-
FER, SCAN
.UNI Mapping unit which is defined in
the configuration for an IO port
(Text) ANALOG IN,
ANALOG OUT
.VAL Value of the command variables
(optional, i.e. Command-
name.Portname' =Command-
name.Portname.VAL') (Num-
ber). The value returned is the value
after the ending of the command. ANALOG IN,
ANALOG OUT,
DIGITAL IN, DIG-
ITAL OUT
.VAR Variance of the calculated result of
the standard addition in the selec-
ted unit STDADD
.VOL Dosed volume STDADD, ADD,
DOS, LQH
2.4.3.5 Result variables
Dialog window: Formula Editor ▶ Variables
Result variables are method-specific and are defined in the CALC command
of the method. The field Variables of the formula editor lists all Result
variables which are available for the current method.
Syntax
'RS.Result name.Variable identification'
Examples: 'RS.RS01.VAL' (='RS.RS01'), 'RS.testTime.UNI'
You can select the method variables directly in the formula editor under
Variables
▶ Result Variables in order to avoid syntax errors.