Metrohm tiamo 2.2 Manual - Manual (Page 1035)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.2 ￭￭￭￭￭￭￭￭ 1021
Note
The formula editor is opened with a right click in the input field.
5.6.5.4 CAL LOOP pH
5.6.5.4.1 CAL LOOP pH - Overview
Dialog window: Method ▶ CAL LOOP pH ▶ Properties... ▶ CAL LOOP pH - 'Command
name'
Loop command for the calibration of pH electrodes which is used
together with the command CAL MEAS pH.
Appearance
The command has the following appearance:
Parameters
The parameters for the command CAL LOOP pH are configured in the
following dialog window:
￭ CAL LOOP pH - Properties
Command variables
The following command variables are generated in the method run by the
command CAL LOOP pH and can be used in formulas under the designa-
tion 'Command name.Variable designation':
Identifi-
cation Description
.BSY Command status; 1 = BUSY, HOLD or ERROR; 0 =
READY; invalid (variable not available) = Command has
not ever been started
.ENP Electrode zero point calculated from the calibration
.FIN Command status; 1 = Command has been ended at
least once, 0, invalid (variable not available) = Command
has never been ended
.LCO Loop counter = current quantity of completed runs, both of
Repeat loops and of While loops
.LST Start time of the loop command (Date/Time)