Metrohm tiamo 2.2 Manual - Manual (Page 1277)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 6 Configuration
tiamo 2.2 ￭￭￭￭￭￭￭￭ 1263
6.5.2.4 Devices - Column display
Dialog window: Configuration ▶ Devices ▶ [Edit] ▶ Column display… ▶ Column dis-
play
With[Edit] ▶ Column display…, the dialog window Column display
opens. Here you can define the columns that are to be shown in the device
table.
Available columns
Shows all the fields that can be shown as columns in the device table.
Displayed columns
Shows all the fields that will be shown as columns in the device table. The
default position is that the columns Device name, Device type, Device
serial number, Status, Set to work, Next GLP test and Remarks will
be shown. The columns Device name and Device type are always present
and cannot be removed.
Adds the selected column to the table.
Removes the selected column from the table.
Modifies the sequence of displayed columns by moving the selected column
up.
Modifies the sequence of displayed columns by moving the selected column
down.
6.5.2.5 Editing ignored devices
Dialog window: Configuration ▶ Devices ▶ [Edit] ▶ Ignored devices… ▶ Ignored
devices
The dialog window Ignored devices is opened with [Edit] ▶ Ignored
devices…. Here the list of ignored devices can be edited.
Ignored devices are devices which are recognized automatically upon con-
nection but are ones which the user does not wish to have permanently
displayed in the device table. Ignored devices will no longer be recognized
automatically at the time of the next program start.