Metrohm tiamo 2.2 Manual - Manual (Page 1290)

6.6 Subwindow Titrants/Solutions ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1276 ￭￭￭￭￭￭￭￭ tiamo 2.2
6.6.3.5 Titer history Limit values
Dialog window: Configuration ▶ Titrants/solutions ▶ Properties ▶ Titer his-
tory ▶ [Limit values] ▶ Limit values titer
Warning and intervention limits can be defined for the titer in the dialog
window Limits for titer. If you have defined limits then these will be shown
in the graph in orange for warning limits and red for intervention limits.
Whether these limits are observed is not monitored, i.e. if the limits are
exceeded no action will be taken and these solutions can be used in deter-
minations.
Warning limits for titer
on | off (Default value: off)
If this option is switched on, then the titer value will be shown in
orange if this limit is exceeded.
Lower limit
Lower warning limit.
Input 10 digits
Default value 0.9750
Upper limit
Upper warning limit.
Input 10 digits
Default value 1.0250
Intervention limits for titer
on | off (Default value: off)
If this option is switched on then the titer value will be shown in red if this
limit is exceeded.
Lower limit
Lower intervention limit.
Input 10 digits
Default value 0.9500
Upper limit
Upper intervention limit.
Input 10 digits
Default value 1.0500