Metrohm tiamo 2.2 Manual - Manual (Page 1496)

8.5 Manual Control - Graphical display ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1482 ￭￭￭￭￭￭￭￭ tiamo 2.2
Range 0 ... 100 Pixels
Default value 0 Pixels
[Measuring]
Start measuring of the intensity. The parameters defined will be used.
8.4.5.4 Measure - Sample spectrum
Program part: Manual Control
Here a sample spectrum can be measured and displayed.
Note
Before a sample spectrum can be measured, a reference spectrum has to
be recorded in a determination by a spectrometer.
The parameters Start wavelength, End wavelength, Integration
time, Averaged spectra and Smoothing are read out of the reference
spectrum and displayed, they cannot be modified.
[Measure]
Start measuring of the sample spectrum. The parameters defined will be
used. Only active, if a reference spectrum is available.
8.5 Manual Control - Graphical display
Program window:Manual control
In the subwindow for the graphical display all running, manually triggered
functions are displayed graphically.