Metrohm tiamo 2.2 Manual - Manual (Page 1442)

7.14 874 Oven Sample Processor ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1428 ￭￭￭￭￭￭￭￭ tiamo 2.2
Action
The actions can only be edited if monitoring is switched on.
If during monitoring it is found that the validity period has expired then one
of the following actions will be triggered automatically at Start test.
Selection Record message | Display message | Stop deter-
mination
Default value Display message
Record message
The message that the validity period has expired will be automatically
saved with the determination.
Display message
A message is displayed and you can choose whether you want to con-
tinue the run or cancel it. If the run is continued then the message that
the validity period has expired will be automatically saved with the deter-
mination.
Stop determination
The running determination will be automatically terminated. The follow-
ing message must be confirmed with [OK].
7.14 874 Oven Sample Processor
7.14.1 874 Oven Sample Processor - Overview
Dialog window: Configuration ▶ Devices ▶ [Edit] ▶ Properties ▶ Properties - 'Device
type' - 'Device name'
The parameters for the device 874 Oven Sample Processor are set on
the following tabs:
￭ General
General device information such as device name, device type, serial num-
ber, etc.
￭ Tower
Properties of the tower.
￭ Rack
Information on the rack attached.
￭ MSB #
Properties of the MSB connector 1...3 and the peripheral devices con-
nected to.
￭ Oven
Information on the oven.
￭ GLP
Information on GLP tests and GLP monitoring.