Metrohm tiamo 2.2 Manual - Manual (Page 1247)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 6 Configuration
tiamo 2.2 ￭￭￭￭￭￭￭￭ 1233
Note
If the backup directory is on a network drive, the backup date should be
added manually to the Backup name because the backup date infor-
mation is not available when the directory is restored.
[Start]
Start manual backup of complete configuration database (including method
groups and methods).
6.3.2.3 Restore configuration data
Dialog window: Restore configuration data
Dialog window "Restore configuration data"
Backup directory
Selection of a directory predefined in the Program administration that con-
tains the backed up configuration database.
Selection Backup directories
Backup name
Selection of a backup file.
Selection Backup files
Backup date
Shows the time at which the configuration database was backed up. If the
backup file is located on a network drive, this information is not available.
Database name
Shows the name of the configuration database. If the backup file is located
on a network drive, this information is not available.
Size
Shows the size of the configuration database in KB.
Save as
Name under which the configuration database will be restored.
[Start]
Starts the recovery of the configuration database. After the start, a progress
bar appears in the window. When the backup has been completed the dia-
log window closes automatically.