Metrohm tiamo 2.2 Manual - Manual (Page 139)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 3 Workplace
tiamo 2.2 ￭￭￭￭￭￭￭￭ 125
ERROR
Error.
3.6.3.4 Single determination - Determination parameters
Subwindow: Run ▶ Sequence ▶ Single determination
User
If the option User name required is enabled in the security settings, then
the abbreviation of the currently registered user will be displayed in this field.
This field is then not available for editing. If work is done without registering,
then a user name can be entered in this field (only in the status READY).
Input 50 characters
Sample number
The sample number is set to 0 for all workplaces at the time of each program
start. Each time a determination is started, it is incremented by +1 . It can
be edited by the user only when it is in the status READY.
Range 0 ... 99999
Default value 0
Remark
Freely definable remarks concerning the determination, that are saved
together with the determination. Prepared sample texts can also be selected
instead of making manual entries (see Chapter 3.5.1, page 120).
Note
The field Remarks can also be modified live while determinations are
running. The context-sensitive menu item Modify remarks is used to
open the dialog window Live modifications (see Chapter 3.6.3.6, page
128).
Input 100 characters
Autostart
Display of the number of automatic, internal starts of single determinations.
This field is only displayed if the option Autorepeat determinations is
enabled on the Process tab (see Chapter 3.6.3.9.4, page 135). With every
triggering of [Start] the counter is reset to 0.
Statistics
on | off (Default value: on)
This field is displayed only when a method has been loaded in the START
command of which the option Statistics has been enabled. The statistics