Metrohm tiamo 2.2 Manual - Manual (Page 1036)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1022 ￭￭￭￭￭￭￭￭ tiamo 2.2
Identifi-
cation Description
.SLO Electrode slope calculated from the calibration
5.6.5.4.2 CAL LOOP pH - Properties
Dialog window: Method ▶ CAL LOOP pH ▶ Properties... ▶ CAL LOOP pH - 'Command
name'
The number of buffers and the buffer type are defined in the dialog window
CAL LOOP pH - 'Command name'.
Command name
Name of the command.
Input 25 characters
Buffers
Number of buffers
Selecting the number of buffers for the pH calibration.
Selection 1 | 2 | 3 | 4 | 5
Default value 2
Buffer type
Selecting a predefined buffer series for the pH calibration.
If these buffers are used, tiamo will recognize the particular buffer auto-
matically.
Selection Metrohm | NIST | DIN | Fisher | Fluka Basel |
Mettler | Merck | Merck CertiPUR 25°C | Beck-
man | Custom | Special | Radiometer | Baker |
Hamilton DURACAL | Precisa
Default value Metrohm
Custom
Uses the custom buffer series defined in the configuration under
Tools
▶ Templates ▶ Custom calibration buffers.
Special
Up to five calibration buffers can be defined directly in the Properties
window of the command CAL LOOP pH.