Metrohm tiamo 2.2 Manual - Manual (Page 443)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.2 ￭￭￭￭￭￭￭￭ 429
Type = Date/Time
Selection
'Date'
Upper limit
Upper limit for the variable.
Type = Number
Input
10 digits
Type = Date/Time
Selection
'Date'
Message
Note
Is displayed only for method variables of the types Number or Date/
Time.
The message defined here can be output to different targets if the upper
limit is exceeded or if the lower limit is not reached. The text editor for
entering or changing the message is opened with or by double-clicking
into the text field (see Chapter 2.5.2, page 84). The formula editor can also
be called up inside the text field (see Chapter 2.4, page 25).
Input Text (unlimited)
Display message
on | off (Default value: on)
If this option is enabled, all active tracks are stopped and the message
defined in the text box will be displayed in the event that the limits are
exceeded.
Record message
on | off (Default value: on)
If this option is enabled, the message defined in the text box will be docu-
mented in the determination if the limits are exceeded.
Message by E-mail
on | off (Default value: off)
If this option is enabled, the message defined in the text box will be sent to
the address defined under if the result limits are exceeded.