Metrohm 840 PC Control 5.0 / Touch Control User Manual

Page 335

Appendix

PC Control / Touch Control

323

• The assignment of sample identification 3 (C23) to a common vari-

able is not possible.

• The assignment of sample identification 3 (C23) to a statistics vari-

able is not possible.

• A formula contains the sample identification 3 (C23). The variable

has been replaced by -0.

• The method contains the parameter 'activation pulse: first'. This pa-

rameter has been ignored.

• Measuring input 'diff.' has been replaced by measuring input '1'.
• The relative start volume has been replaced by 0.00 mL.
• The relative stop volume has been replaced by 100.00 mL.
• SET: The delay time for EP1 and EP2 was set to 'inf.'
• The method contains the evaluation 'fix time'. This parameter is ig-

nored.

• An old method file with the same name has been replaced.
• The method file has been renamed to: New method name

Conversion not possible (red-marked methods)
• The method could not be converted.
• This mode is not supported. Only DET, MET, SET, KFT, STAT,

MEAS and DOS can be converted.

• Conditioning is switched on. The method cannot be converted.
• This mode is not supported. Only STAT pH/U can be converted.
• The measured quantity Ipol/Upol being monitored is not supported.

Check the monitoring settings.