Metrohm 840 PC Control 5.0 / Touch Control - Manual (Page 157)

3 Operation
PC Control / Touch Control
145
3.19.3 Sample data silo
If you would like to use the sample data silo then you must activate the
corresponding checkbox under Control. With PC Control you can
also enter the sample data when the sample data silo has not been
activated. You can open and close the table in the menu View. With
Touch Control the sample data silo for the sample data input must be
activated.
If the sample data silo is activated then in the main dialog the [Sample
data silo] button will be seen instead of the input field for the sample
data.
For the sample data silo the number of lines which have already
been processed from the total number of lines in which sample data
have been entered is shown in the main dialog.
Open the sample data table with [Sample data silo].
PC Control
With PC Control the sample data table is shown beneath the open
dialog window. The individual fields can be filled in directly. The silo line
into which the weight is transmitted by a balance is indicated by the
following character: >.