Metrohm 840 PC Control 5.0 / Touch Control - Manual (Page 109)

3 Operation
PC Control / Touch Control
97
The dialog in which you can enter the templates for sample
identifications is opened automatically with [New]. For an existing
template this dialog can be opened with [Edit]. Existing sample
identifications can be removed from the list with [Delete].
Exit the dialog with [Back] and activate the Use sample
identification list checkbox so that you can select from the
templates when entering the sample data.
3.14.2 Sample assignment table
If you use the sample assignment table then you can be sure that the
samples will be processed with the correct method. In the sample
assignment table a sample identification is assigned to a particular
method. Samples with an identification which appears in this table can
only be processed by the assigned method. This means that no
mistakes can occur. The user enters the sample identification and at
the START of the determination the correct method is loaded
automatically.
Open the dialog Templates/Sample data.
Use [Sample assignment table] to open the list of sample
identifications with their assigned methods.
You can define new sample assignments with [New].