Metrohm 840 PC Control 5.0 / Touch Control - Manual (Page 319)

6 Appendix
PC Control / Touch Control
307
6.2 Remote box
The 6.2148.010 Remote box allows devices to be controlled which can-
not be connected directly to the MSB interface of the Titrando, e. g. Le-
vel Control 849. The connection of the Remote box is described in the
Installation Instructions for the Titrando.
Fig. 6.1: View of the connections of the optional 6.2148.010 Remote box
6.2.1 Pin occupancy of the remote connection at the Remote box
Fig. 6.2: Pin occupancy at remote interface
The following applies for all outputs: V
CE0
= 40 V
I
C
= 20 mA
t
pulse
> 100 ms
+5 V
Input
active = low
inactive = high
Output
active = low
inactive = high
Output 6
Output 7
Output 4
Output 2
Output 0
Output 8
Output 9
Output 10
Input 1
Input 3
Input 5
Input 7
Output 11
0 Volt
+5 Volt
Output 5
Output 3
Output 1
Output 12
Output 13
Input 0
Input 2
Input 4
Input 6
0 Volt
14 1
13 25