Metrohm 840 PC Control 5.0 / Touch Control - Manual (Page 162)

3.19 Sample data
150
PC Control / Touch Control
You can disable editing the sample data in the sample data silo.
This is a good idea when the sample data silo has been filled and
you wish to prevent data from being altered while the silo is being
processed.
Display options (Touch Control only)
Open the dialog Properties/Show options and deactivate the
checkboxes for the sample data you do not want to use. These will
then no longer be shown in the edit dialog for the individual
samples.
Edit options
In this dialog you can define the settings for editing the sample data
table.
Open the dialog Properties/Edit options.
Select whether the silo line is to be automatically concluded with
Sample size, Identification 1 or Identification 2. When the
corresponding entry is confirmed with [OK] or [Enter] then the
program switches automatically to editing the next line. You can
also conclude the sample data input for a silo line manually. With
Touch Control in this case the [New sample] button will be shown
in the edit dialog. With that you can open the edit dialog for a new
sample. With PC Control a new silo line will be generated when the
sample size is confirmed with [Enter].
If you have to enter similar data for each sample then you can
automatically copy into the next line the data which is identical
for each sample. Deactivate the checkboxes for the data which is
not to be copied into the next line.
Identifications
If you want to enter different method-independent labels for the
identifications, e. g. batch number, density, etc. then you can enter your
own labels under Label. These will be updated in the sample data table
and when the sample data is requested with a REQUEST command.
Open the dialog Properties/Identifications.