Metrohm 840 PC Control 5.0 / Touch Control - Manual (Page 124)

3.15 Loading methods
112
PC Control / Touch Control
Method template Command sequence Application
SP Method
rinse sample
beaker
MOVE (rotate rack)
LIFT (move lift to work
position)
STIR
WAIT
STIR
SUBSEQ (aspirate and rinse
in sample beaker)
SUBSEQ (End sequence)
Titration with the USB Sample
Processor.
The WAIT command must be
deleted and replaced by a titration, a
CALC and a REPORT command.
SP
Calibration
and measure
SUBSEQ (Start sequence for
pH calibration)
SUBSEQ (rinse and aspirate)
MOVE
LIFT
STIR
MEAS pH (pH measurement)
STIR
CALC
REPORT (result report)
SUBSEQ (End sequence)
pH calibration with subsequent pH
measurement with the USB
Sample Processor.
SP Pipetting
Ext. Position
SUBSEQ (Start sequence)
SUBSEQ (pipetting at ext.
position)
WAIT
STIR
PUMP
SUBSEQ (End sequence)
Pipetting the sample into a beaker
at external position 1.
The WAIT command must be
deleted and replaced by a titration, a
CALC and a REPORT command.
Note!
If you have no printer connected to your system then you should
delete all REPORT commands from the list of commands.