Metrohm 840 PC Control 5.0 / Touch Control - Manual (Page 179)

3 Operation
PC Control / Touch Control
167
3.23 Print
In principle there are two ways of printing a report in Touch Control and
PC Control:
• Manual printout with the [Print] fixed key (see below).
• Printout during the determination sequence with a REPORT
command (see Section 4.6).
By using the PC Control software you have the additional possibility to
generate reports directly as PDF file. The settings are described on
page 175.
How to connect a printer to a Titrando system with Touch Control is
described in the Installation Instructions for the Titrando. The
configuration of the printer is described in Section 3.10.7. The PC
Control software automatically uses the printer selected under
File/Printer.
You can use the [Print] fixed key to rapidly print out context-
sensitive reports for the dialog which is currently open. You can also
print out all other reports which are available. The [Print] fixed key is
inactive while a determination is being carried out (BUSY).
Open the Print dialog from the main dialog with the [Print] fixed
key.
The sample data is entered in the main dialog, which is why you can
print out the sample data from the main dialog in a context-sensitive
situation with [Current sample data]. All reports as defined in the
current method can be printed with [Report seq. as def. in
method]. With [More reports] you can open a list containing all the
available reports. You can make general settings for printing out the
reports with [Report options].
Open the dialog Print/More reports. The first list shows the
reports for the current determination.