Metrohm 840 PC Control 5.0 / Touch Control - Manual (Page 119)

3 Operation
PC Control / Touch Control
107
3.15 Loading methods
The sequence of a determination is defined in the method. In the Load
method dialog you can load saved methods or method templates for
creating new methods.
3.15.1 Loading a method
Methods can be saved in the internal memory, on Card 1 or Card 2 or a
shared file system (requires 847 USB Lab Link, see Section 3.10.11). In
a new system no methods are stored in the internal memory which is
why the following example describes loading a method from Card 1,
on which the methods provided as examples are stored.
With Touch Control insert the supplied data card containing the
examples of methods in Card slot 1.
From the main dialog open the dialog Load method and select
[Card 1].
The selection of the memory location will be skipped if only the internal
memory is accessible. If several file groups exist on the card then a list
showing the existing groups will be displayed:
The selection of the group will be skipped if only one group is present in
the selected memory.