Metrohm 840 PC Control 5.0 / Touch Control - Manual (Page 135)

3 Operation
PC Control / Touch Control
123
3.16.9 Properties
The properties of the current method are shown under Method
options/Properties.
An explanation for the individual entries can be found in the online
help. The method shown as the example has already been saved twice
(version 2). In comparison to the stored version 2 further parameters
have been edited, so that the Method status is not saved but
modified.
Information about the first person to save the method and when it was
first saved (Created by and Created on) is given together with the last
person to save the method and when it was last saved (Last saved by
and Last saved on). Each time that the method is saved under the
same name the version number is increased by one, even when the
method is saved in a different memory.
If under Login options/Modification options the entry of a reason
for altering methods is activated then the user who altered the method
will be given together with the exact time at which the alteration was
made and the reason for it. If the method has been signed then the
person who signed will also be documented automatically together with
when and at what level (Reviewed/Released by and
Reviewed/Released on) the method was signed.
3.16.10 Saving the determination automat. and sending a PC/LIMS
report
In the method you can define that the determination data is to be
saved automatically at the end of the determination sequence and/or
saved or transmitted as a PC/LIMS report.
Open the dialog Method options/Save automatically and
activate the Save determination automatically checkbox.