Metrohm 840 PC Control 5.0 / Touch Control - Manual (Page 13)

1 Introduction
PC Control / Touch Control
1
1 Introduction
This manual gives you a comprehensive overview of the functions of the
Touch Control and the PC Control software for operating the Titrando
system. The Titrando system can either be operated with the Touch
Control with touch-sensitive screen as a stand-alone-system or with
the PC software PC Control. In this case the varied possibilities of a
computer can be utilized.
Figure 1.1 shows the versatility of the Titrando system. On the left a
Touch Control for operating a Titrando with external dosing devices is
shown. To the right you can see an automation system consisting of
USB Sample Processor, Titrando with internal dosing drive and Dosi-
mat controlled by the PC Control software.
Fig. 1.1: The Titrando system