Metrohm 840 PC Control 5.0 / Touch Control - Manual (Page 188)

3.24 Manual control
176
PC Control / Touch Control
3.24 Manual control
The following functions are available in the manual control:
• Measuring
• Dosing
• Controlling a USB Sample Processor
• Manual titration
• Stirring
• Requesting and setting remote lines
The manual control of devices that are not being used in the sequence
is also possible during a determination sequence (BUSY). The dialog
for manual control is opened with the [Manual] fixed key. With PC
Control an additional dialog window is opened so that the PC Control
dialog window and the manual control dialog window can be seen side
by side.
PC Control:
Click on [Manual].
You can open the online help for manual control with [Help]. In
manual control [Back] switches to the previous dialog. The Manual
control dialog window is closed with [×] (close). You can also close the
window when a manual run has been started and is not yet finished. In
manual control you can recognize when a run has been started by the
corresponding symbol in the status line (see Section 3.6).