Metrohm 840 PC Control 5.0 / Touch Control - Manual (Page 113)

3 Operation
PC Control / Touch Control
101
To input the binary pattern please consult the online help.
3.14.5 Output lines
Binary patterns can be defined for setting remote lines with the CTRL
command (see Section 4.11.2) during the determination sequence or in
manual operation (see Section 3.24.5); these can then be selected
when editing the parameters.
Open the dialog Templates/Output lines.
You can define new templates with [New]. Existing templates can be
removed from the list with [Delete] or edited with [Edit].
List of predefined output lines
Parameter Signal
pattern Function
Continue *********p**** sends a pulse to continue to the connected Sample
Processor
INIT 00000000000000 initializes the Remote interface
METER Cal C *********1001* switches ion meter to Conc calibration
METER Cal pH *********0101* switches ion meter or pH meter to pH calibration and
starts it
METER enter *********1111* simulates the key for ion meter or pH meter
(essential for pH calibration with 691/780/481, in order to
start the measurement of the second buffer)