Metrohm 840 PC Control 5.0 / Touch Control - Manual (Page 116)

3.14 Templates
104
PC Control / Touch Control
3.14.7 Report header
You can enter a text here (max. four lines each with 46 characters)
which will always be printed out in front of the standard report header
(see Section 3.23).
Enter the text for your Report header. If you want to print out the
Metrohm logo to the right of the text then activate the Print logo
checkbox and select Metrohm logo in the selection list. If you wish
to print your own logo in the report header select Custom logo. The
creation of your own logo is described below.
The settings shown above will produce a report header which looks like
this:
Metrohm AG
9101 Herisau
Switzerland
PC Control
PC Control Serial number 3079972211
Printed Program version 4.1
2006-05-22 16:15:21
Creating your own logo
This is done by using the file CustomBitmap.gif in the installation
folder of the PC Control Software.
Open this file in an image processing program and copy your logo
into it. The image must not exceed a size of 472 x 92 pixels. If
necessary you must reduce the size of your logo accordingly.
Save the image as a gif file.
Now select Custom logo in the selection list.
Under File/Custom Logo, enter the path under which you have
stored the logo.
Activate the option PC Control or Touch Control, depending on
what you want to use your logo with. For Touch Control the image is
reduced to the eight basic colors red, green, blue, cyan, magenta,
yellow, white and black.