Allied Telesis AT-S62 - Manual (Page 717)

AT-S62 Menus Interface User’s Guide
717
Basic Switch Default Settings
This section lists the default settings for basic switch parameters. The
following topics are covered:
❑ Boot Configuration File Default Setting on page 717
❑ Management Access Default Settings on page 717
❑ Management Interface Default Settings on page 717
❑ RS-232 Port Default Settings on page 718
❑ SNTP Default Settings on page 718
❑ Switch Administration Default Settings on page 719
❑ System Software Default Settings on page 719
Boot
Configuration
File Default
Setting
The following table lists the File Menu default setting.
Management
Access Default
Settings
The following table lists the management access default settings.
Management
Interface Default
Settings
The following table lists the management interface default settings.
File Menu Setting Default
Default Configuration File boot.cfg
Remote Management Access Setting Default
Telnet Enabled
SNMP Disabled
TFTP Enabled
Web Server Enabled
Management Interface Setting Default
Manager Login Name manager
Manager Password friend
Operator Login Name operator
Operator Password operator