Allied Telesis AT-S62 - Manual (Page 280)

Chapter 16: Quality of Service
Section II: Advanced Operations 280
9. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.
Deleting a Traffic
Class
To delete a traffic class, do the following procedure:
1. From the Main Menu, type 7 to select Security and Services.
2. From the Security and Services menu, type 6 to select Quality of
Service.
The Quality of Service (QoS) menu is shown in Figure 87 on page
269.
3. From the Quality of Service (QoS) menu, type 2 to select Traffic Class
Configuration.
The Traffic Class Configuration menu is shown in Figure 91 on
page 275.
4. Type 3 to select Destroy Traffic Class.
The following prompt is displayed:
Available Traffic Class(es): 0-7
Enter Traffic Class ID : [0 to 511] -> 0
5. Enter the ID number of the traffic class you want to delete. You can
delete only one traffic class at a time.
The Destroy Traffic Class menu is displayed. The menu contains
the specifications of the selected traffic class. Use this menu to
confirm that you are deleting the correct traffic class.
6. Type D to delete the traffic class.
The traffic class is deleted from the switch. The class is removed
from any policies to which it is assigned.
7. To delete another traffic class, repeat this procedure starting with
step 4.
8. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.
Displaying Traffic
Classes
To display the traffic classes, do the following procedure:
1. From the Main Menu, type 7 to select Security and Services.
2. From the Security and Services menu, type 6 to select Quality of
Service.
The Quality of Service (QoS) menu is shown in Figure 87 on page
269.
3. From the Quality of Service (QoS) menu, type 2 to select Traffic Class
Configuration.