Allied Telesis AT-S62 - Manual (Page 561)

AT-S62 Menus Interface User’s Guide
Section V: Virtual LANs 561
5. Enter a port. You can configure more than one port at a time.
The Configure GVRP Port Settings Menu is shown in Figure 196.
Figure 196 Configure GVRP Port Settings Menu
6. Type 1 - Port Mode.
The following prompt is displayed:
Enter mode (0-Normal, 1-None): [0 to 1] -> 0
7. Type either 0 to select Normal or 1 to select None. A setting of Normal
means the port processes and propagates GVRP information. This is
the default setting. A setting of None prevents the port from
processing GVRP information and from transmitting PDUs.
A change to GVRP port mode is immediately activated on a port.
8. If you want to view the current port settings, from the GVRP Port
Parameters menu, type 2 to display the GVRP port configuration.
The Display GVRP Port Configuration Menu is shown in
Figure 197.
Figure 197 Display GVRP Port Configuration Menu
Allied Telesyn Ethernet Switch AT-8524M - AT-S62
Production Switch
User: Manager 11:20:02 02-Jan-2004
Configure GVRP Port Settings
Configuring Port 1-2
1 - Port Mode ............. Normal
R - Return to Previous Menu
Enter your selection?
Allied Telesyn Ethernet Switch AT-8524M - AT-S62
Production Switch
User: Manager 11:20:02 02-Jan-2004
Display GVRP Port Configuration
GARP Port Parameters
Mode Normal ............. 1-2
Mode None ............... 3-26
U - Update
R - Return to Previous Menu
Enter your selection?