Allied Telesis AT-S62 - Manual (Page 324)

Chapter 20: Power Over Ethernet
Section II: Advanced Operations 324
The PoE Global Configuration menu is shown in Figure 111.
Figure 111 PoE Global Configuration Menu
Options 2, Maximum Available Power, displays the maximum
amount of PoE for the switch. For the AT-8524POE switch, this
value is 400W. This value cannot be changed.
4. From the PoE Global Configuration menu, type 1 to select Power
Threshold.
The following prompt is displayed:
Enter percentage of power limit threshold : [1 to
100] -> 95
Enter the new threshold as a percentage of the total available PoE
power on the switch. As an example, to configure the switch to
enter an event in the event log and send an SNMP trap when
power consumption exceeds 300 W, you would enter 75, for 75%.
The new threshold is immediately activated on the switch.
5. After making the change, type R until you return to the Main Menu.
Then type S to select Save Configuration Changes.
Allied Telesyn Ethernet Switch AT-8524POE - AT-S62
Production Switch
User: Manager 11:20:02 02-Jan-2004
PoE Global Configuration
1 - Power Threshold ................ 95 percent
2 - Maximum Available Power ........ 400W
R - Return to Previous Menu
Enter your selection?