Allied Telesis AT-S62 - Manual (Page 713)

AT-S62 Menus Interface User’s Guide
Section VII: Management Security 713
255.255.255.255. If you are filtering on a subnet, the mask will depend
on the address. For example, to allow all management workstations
in the subnet 149.11.11.0 to manage the switch, you would enter the
mask 255.255.255.0.
This prompt is displayed:
Enter the Protocol [TCP]:
6. Enter TCP.
AT-S62 management packets from Telnet and web browser
management sessions use TCP.
This prompt is displayed:
Enter the Interface [TELNET/WEB/ALL]:
7. Specify which interface you want a remote management workstation
to be able to use when managing the switch. Your choices are:
❑ Telnet - Permits only Telnet management.
❑ Web - Permits only web browser management.
❑ All - Permits both Telnet and web browser management.
8. If needed, repeat this procedure starting with Step 3 to add more
ACEs to the Management ACL.
9. After you have added all of the ACEs, type 1 to select Management
ACL Status and toggle the selection to Enabled.
The Management ACL is now active on the switch.
10. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.