Allied Telesis AT-S62 - Manual (Page 273)

AT-S62 Menus Interface User’s Guide
Section II: Advanced Operations 273
4. Type 3 to select Destroy Flow Group.
The following prompt is displayed:
Available Flow Group(s): 0-10
Enter Flow Group ID : [0 to 1023] -> 0
5. Enter the ID number of the flow group you want to delete. You can
delete only one flow group at a time.
The Destroy Flow Group menu is displayed. The menu contains
the specifications of the selected flow group. Use this menu to
confirm that you are deleting the correct flow group.
6. Type D to delete the flow group.
The flow group is deleted from the switch. The group is removed
from any traffic classes to which it is assigned.
7. To delete another flow group, repeat this procedure starting with
step 4.
8. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.
Displaying Flow
Groups
To display flow groups, do the following procedure:
1. From the Main Menu, type 7 to select Security and Services.
2. From the Security and Services menu, type 6 to select Quality of
Service.
The Quality of Service (QoS) menu is shown in Figure 87 on page
269.
3. From the Quality of Service (QoS) menu, type 1 to select Flow Group
Configuration.
The Flow Group Configuration menu is shown in Figure 88 on
page 270.
4. Type 4 to select Show Flow Groups.